ABS shell performance ABS has good impact strength and surface hardness within a certain temperature range, good dimensional stability, certain chemical resistance and good electrical insulation. It is opaque, generally light ivory in colour, and can be made into any other colour product with a high degree of gloss by colouring, and electroplated grades can be decorated with electroplating and vacuum coating on the exterior. General purpose ABS is impervious to water, burns slowly, softens when burned, has a yellow flame, black smoke and eventually burns with a distinctive smell, but has no molten drops. The recommended drying conditions are a minimum of 2 hours at 82-91C. The temperature of the material should be less than 0.1%. Melting temperature: 211~281C; recommended temperature: 248C. Mould temperature: 26…72C. (Mould temperature will affect the finish of the moulded part, lower temperatures will result in a lower finish). Injection pressure: 501 to 1000 bar. Injection speed: medium to high speed.

1. ABS formula specially designed for good heat and glue sealing.
2、The material does not contain cadmium, chromium and other harmful toxic heavy metals, the production and application process will not cause any pollution to the environment, in line with ROHS certification requirements.
3, ABS has good fluidity, injection moulding is not easy to appear silver lines or air marks, good dimensional stability and good air tightness.
4, has good impact resistance, low-temperature environment by the impact does not crack.
5、ABS has high flame retardant efficiency, can give the composite material good self-extinguishing or incombustibility, meet UL94 standard.
6、Good heat resistance, not easy to bulge under high temperature when injection molding into shell.